Power Tools
Showing all 15 results
-
Power Tools
Stallion Demolition Hammer 2500w
The demolition hammer is one of the power tools specifically designed for the demolition of the structure. It is also known as stomping hammers. Demolition hammer tools are strong enough to break down various materials such as wooden walls, concrete surfaces and tile flooring.
SKU: n/a -
Power Tools
Airless Sprayer 3500psi 1800watts
Basically, an airless sprayer works by pumping paint at fairly high pressure, up through a house and out of a very small hole through the spray gun tip. The nozzle is designed to break up the paint evenly by creating a fan spray pattern of tiny droplets over the surface.
SKU: n/a -
Power Tools
Black & Decker 4.5 Amp Variable Speed Jigsaw
Short Description:
- Tool-free blade change accepts both U and T shank blades
- SIGHTLINE® Channel improves visibility of cut line
- Powerful 4.5 Amp motor cuts wood, metal and plastics
- On- Board Blade Storage quickly access stored blades
- Beveling Shoe allows for angled cuts in both directions
- Automatic Dust Blower clears cutting areas of debris for increased visibility
SKU: n/a -
Car Assessories, Power Tools
nc-co battery charger 6/12v 6A
nc-co battery charger 6/12v 6A @ 14500
A battery works by converting its stored chemical energy into electrical power. Once the electrolyte of the battery is used up, it needs to be recharged. A battery charger is a device that provides Direct Current (DC) to the battery to restore the used-up electrolyte.
SKU: n/a -
Power Tools, Tools
Edon mosfeta&smart inverter welder MMA-300s
Short Description:
– Because inverters are more efficient, they can produce a more stable arc. For this reason, inverter welders take the trophy for both efficiency and stability. Transformers, by nature, have higher duty cycles so in theory they can handle more heavy-duty work than an inverter machine.
SKU: n/a -
Power Tools, Tools
Edon mosfeta & smart inverter welder MMA-250S
Short Description:
These designs are known as inverter welding units. They generally first rectify the utility AC power to DC; then they switch (invert) the DC power into a step down transformer to produce the desired welding voltage or current.
SKU: n/a -
Power Tools, Tools
Professional Dera welding machine DK-ZX7-250MA
Short Description:
Inverter-based devices use a series of electronic components to convert the power – in contrast to conventional transformer-based devices which depend primarily on a single large transformer to regulate the voltage.
SKU: n/a -
-
Power Tools, Tools
Meakida IGBT inverter welding machine MMA-400H
Short Description:
1. DC Output: Many conventional “transformer” MMA (stick) welders only have AC output, which means they are limited in the types of electrodes they can weld with. However, with inverter-based machines the current is much more easily rectified into DC which means they are able to weld a wide range of different welding electrodes.
2. Performance: The performance of quality inverter-based welders is substantially superior to that of conventional welders. This is especially noticeable with MMA (stick) welding where operators find that welding is far easier and they do not have to ‘fight’ the arc.
SKU: n/a -
Power Tools, Tools
Meakida IGBT inverter welding machine MMA-250H
Short Description:
1. Use of Generator Power: Being very efficient means that using generator power is much more viable with inverter welders, which can be operated on smaller portable generator sets – something that is often not possible with traditional transformer machines. It should be noted that there are risks involved with using generators power – for more information, read our article on generator use with inverter welders.
2.Duty Cycle: Generally much higher duty cycles are achievable with inverter-based machines, again due to the difference in transformer size. Although the smaller components in an inverter machine heat up quickly, they can be cooled much easier and faster. In conventional “transformer” welders, however, the components are much bigger and therefore tend to store heat and take longer to cool.
SKU: n/a -
Power Tools, Tools
Meakida IGBT inverter welding machine MMA-200H
Short Description:
Meakida IGBT inverter welding machine MMA-200H
Manual Metal Arc welding process uses a flux coating surrounding the consumable electrode to provide a shielding gas that keep impurities out of the molten metal. … MMA also provides excellent penetration and gives the welder a reasonable amount of weld control.
SKU: n/a -
Power Tools
Dera jigsaw wood drawing machine 600w
Short Description:
he Dera Variable Speed Orbital Jigsaw glides through wood, metal, plastic and more, making any pattern or contour easy to achieve. The variable speed dial adjusts the stroke of the blade anywhere from 0 to 3,300 strokes per minute. Attack wood up to 4-1/4 inches thick and metals up to 3/8 of an inch thick. The orbital selection knob helps adjust the strength of the blade to match the density of the cutting material. Simply turn the knob to change the stroke from vertical to orbital, creating a pendulum effect with the saw’s blade. Easily bevel the bottom footplate up to 45 degrees in either direction for angled cuts in your workpiece. The lock-on button temporarily holds the trigger in place to alleviate the stress of keeping the trigger engaged during long jobs. Make blade changes and installation faster than ever with the tool-free quick release chuck. DERA comes with a one year warranty
SKU: n/a
