Studio Components
Showing all 15 resultsSorted by latest
-
Music and Audio, Studio Components
Acoustic Isolation Shield
The best microphone isolation shields act as filters, minimizing unwanted background noise while also reducing sound-wave reflection for a more balanced recording of your vocals. By isolating your microphone from its surrounding environment, the shield enhances the quality of your voice and prevents distortions.
SKU: n/a -
Music and Audio, Studio Components
Quality Original speaker cable 1.5mm 100m
Quality Original speaker cable 1.5mm 100m @ 4500
Speaker wire is used to make the electrical connection between loudspeakers and audio amplifiers. Modern speaker wire consists of two or more electrical conductors individually insulated by plastic (such as PVC, PE or Teflon) or, less commonly, rubber.
SKU: n/a -
Music and Audio, Studio Components
Original speaker cable 2.5mm 100m
Original speaker cable 2.5mm 100m @ 5500
Speaker cable is the wire used for the electrical connections between speakers and amplifier sources. … Low-resistance wire allows more of the source’s power through to the speaker coil, meaning more power and more sound.
SKU: n/a -
Music and Audio, Studio Components
High quality speaker cable no 600 90mtrs
High quality speaker cable no 600 90mtrs @ 2,999
is used to make the electrical connection between loudspeakers and audio amplifiers. Modern speaker wire consists of two or more electrical conductors individually insulated by plastic (such as PVC, PE or Teflon) or, less commonly, rubber.
SKU: n/a -
Music and Audio, Studio Components
High quality speaker cable no 500 90mtrs
High quality speaker cable no 500 90mtrs @ 2800
is the wire used for the electrical connections between speakers and amplifier sources. … Low-resistance wire allows more of the source’s power through to the speaker coil, meaning more power and more sound.
SKU: n/a -
-
Music and Audio, Studio Components
Dbx 234xs Crossover
Dbx 234xs Crossover @ 9800
Has x10 range switch on both channels.
40Hz high pass (low cut) filter both channels.
Phase reverse switch on all outputs.
Individual level controls on all .
XLR balanced ins and outs.
Mode switches for mono. 4-way or stereo 2-way/3-way operation.
Low frequency summed (subwoofer) output.SKU: n/a -
Music and Audio, Studio Components
Professional Audio 10 Channels Power Sequence Controller Peripheral Device
Music and Audio, Studio ComponentsProfessional Audio 10 Channels Power Sequence Controller Peripheral Device
Professional Audio 10 Channels Power Sequence Controller Peripheral Device @ 13,800
Features:, Power supply sequence controller can be in accordance with the order from the previous level to start the device step , turn off the power.
SKU: n/a -
microphone, Music and Audio, Studio Components
Senheiser 2|double wireless microphone
Senheiser 2|double wireless microphone @ 7500
The wireless microphone outputs an audio signal to its connected transmitter. The transmitter sends this audio signal wirelessly through radio waves. The receiver is tuned to receive these radio waves and audio signals. The receiver outputs the balanced audio signal via an XLR cable.
SKU: n/a -
microphone, Music and Audio, Studio Components
2in1 wireless Microphone
2in1 wireless Microphone @ 8,500
You will need a microphone, a transmitter, and a receiver. A functional wireless microphone system actually consists of three discreet components: A microphone, a transmitter, and a receiver. A microphone is simply the component the user speaks (or sings) into.
SKU: n/a -
Music and Audio, Studio Components
Alsis portable studio USB-Midi keyboard controller @ 16,800
A MIDI controller is a simple way to sequence music and play virtual instruments on your Mac or PC. It works by sending MIDI data (Musical Instrument Digital Interface) to a computer or synthesizer, which then interprets the signal and spits out a sound. If you Ever see keyboard players using a laptop on stage.
SKU: n/a -
Amplifiers, Music and Audio, Studio Components
Micro headphones amplifier| splitter
Micro headphones amplifier| splitter @ 6900
A headphone splitter is a device or a medium that allows you to connect two or more pairs of headphones to the same connector at the same time and listen to music or anything else you want with your friends or family.
SKU: n/a -
Music and Audio, Studio Components
Original pop filter black
Original pop filter black @ 1,800
A headphone splitter is a device or a medium that allows you to connect two or more pairs of headphones to the same connector at the same time and listen to music or anything else you want with your friends or family.
SKU: n/a -
Music and Audio, Studio Components
Behringer studio headphone HPS2000
Short Description:
Behringer studio headphone HPS2000
enables compatibility with most mobile devices and can be connected to the included 1/4″ adapter for hookup to DJ mixers or audio interfaces.
Rugged construction with comfortable padding
Rotating reversible earcups enable quick switching between double- and single-ear wearing
High-efficiency 40mm cobalt capsules
Single-sided cable with oxygen-free copper wires
3.5mm TRS connector with 1/4″ adapter.SKU: n/a -
Music and Audio, Studio Components
Scarlett 2i2 studio Audio+Headset+condenser microphone
Scarlett 2i2 studio Audio+Headset+condenser microphone
- Scarlett USB interface, featuring two of the best performing Scarlett mic preamps the range has ever heard – now with Air.
- CM25 MkIII condenser microphone, for making detailed studio-quality recordings.
- HP60 MkIII professional closed-back headphones, for clear and comfortable audio playback, mixing and monitoring.
- XLR and USB cables in the box, no power supply needed. Unpack, plug in, record.
SKU: n/a
